Yes, the item you selected, Bulldog ATV Winch Mount, part # BDW15157, is the correct winch mount for your 2001 Polaris DU 500 Sportsman.
You will be able to mount an electric winch like the Superwinch LT2000 Electric Utility Winch, part # 1120210. The Superwinch models that are compatible with the ATV Winch Mount are as follows: X1F, X2F, ATV1800, ATV2300, ATV3000, T1500, T2000 and EX1. view full answer...
Yes, we have the mount you will need to install the Superwinch LT2000 ATV Winch on your 2005 Kawasaki 360 Prairie ATV. You will need to use the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15120 which will fit both the 2x4 and 4x4 models. view full answer...
I do believe that the 420 FM1 series Honda ATV you're referring to is part of the Honda Rancher family of ATVs, so you can use the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15181 paired with something like the Superwinch Terra Series ATV Winch - Synthetic Rope - Hawse Fairlead - 3,500 lbs # SW1135230. This winch has a synthetic rope like you're seeking and is ideal for ATVs and will work with that Bulldog mounting plate.
I've linked a review video of the winch mount for you to... view full answer...
Got you covered! You'll need the Bulldog # BDW15151 winch mount. I've verified with Bulldog that the mount is compatible with your 2014 Polaris 400 and with your LT3000 ATV winch. view full answer...
The mount that you need for a 2007 Honda TRX 420 is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114. This is a custom fit for your vehicle frame and will allow you to mount the winch of your choosing.
The Superwinch Terra Series ATV Winch - Wire Rope - Roller Fairlead - 3,500 lbs # SW1135220 you asked from would be an excellent option and is a customer favorite. view full answer...
The etrailer ATV Winch - Synthetic Rope - Hawse Fairlead - 5,000 lbs # e98989 does not have the capability of using a handlebar switch. It does however have an 11 foot long cord with controls attached.
The Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs # 1120210 can be upgraded with the Superwinch ATV Handlebar Switch Upgrade Kit for LT2000 Utility Winch # SW2320200 to get a handle bar mounted switch. view full answer...
I've checked with my Bulldog representative, and have been told that the # BD15174 is indeed the correct winch mount for your 2015 Polaris Sportsman 570. My representative went on to tell me that the mount is compatible with the Superwinch Terra 35. view full answer...
If your Arctic Cat 350 ATV has a snow plow with powered winch lift and you are having trouble with having enough power to both operate the plow and start the ATV from the one battery I suggest you consider keeping the ATV on a maintenance charger like the CTEK MULTI US 7002 12-Volt Universal Battery Charger with Pulse Maintenance # CTEK56353.
This AC-powered charger will keep your ATV battery topped off but won't undercharge or overcharge since it automatically switches to pulse-maintenance... view full answer...
In order to use the # e98989 ATV winch in the 2 inch receiver on the front of your EZ Go golf cart, you'd want to use a Trailer Hitch Receiver Winch Mounting Plate like part # BDW20061R2. Keep in mind, the winch might have a 5K capacity, but you'll be limited by the capacity of the receiver on your golf cart.
The power lead is 6 feet long, if that's not long enough to reach from the front of the golf cart to the battery, you can get longer cables such as the 10 foot # BDW20307 which includes... view full answer...
I have a great solution for you. While we do not carry Badlands products and customized mounting plates for the Apex 12k winch, we do have a base plate that fits the dimensions of your Apex. This will allow you to drill/bolt your winch onto the plate and install it on a front hitch receiver on your 2016 Jeep Wrangler. That plate is the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles - 2" x 2" Hitch # BDW20011. From the available specs I have of the Apex 12k, it measures 21... view full answer...
You will definitely need a larger gauge wire, like 4 or 6 gauge (sometimes 8 is acceptable), when it comes to a winch because they pull a LOT of power for a short time. If a winch you're looking at is only offering 10 gauge wire for a winch then I'd ditch that wiring and go with something better suited for the job at hand.
For a wiring kit that uses 6 gauge wiring we have the Bulldog Winch Wiring Kit for ATV/UTV Winches # BDW20307. This comes with a 120" lead for the vehicle side and a... view full answer...
To install a hitch receiver on your 2004 Honda Rincon 650cc ATV you can use the Curt ATV Ball Mount Adapter with Welded D-Ring # C45006 which installs by bolting on to the tongue of your ATV. This will give you a 2 inch receiver and a D-ring for any of your towing needs.
If you need a hitch ball as well you can by the adapter with either a 1-7/8" hitch ball # C45029 or a 2" hitch ball # C45038. view full answer...
Unfortunately, we do not have any hitch expanders from a 1-1/4 inch hitch receiver to a 2 inch receiver that are able to be used for towing.
Although, I'm a little confused. Your ATV has a 1-1/4 inch receiver and the trailer fits a 2 inch hitch ball. With this being the case you can use a Class I ball mount like # 3593 with a 2 inch hitch ball like # 19258 to tow the trailer with your ATV. view full answer...
To mount the Bulldog Winch Alpha Series Off-Road Winch # BDW10048 to a 2 inch hitch receiver, you will want the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles # BDW20011. This winch mount will make it easy to transfer the winch from the 2 inch front hitch to the 2 inch rear hitch of your Jeep Commander. Keep in mind that when the winch is mounted to the hitch, the capacity of the winch will be limited to the hitch's capacity. I confirmed with my contact at Bulldog Winch that... view full answer...
You would need to consult a qualified welder to have a mount fabricated that will allow you rotate the handle 360 degrees on a hand winch. We do not stock any bolt on parts that are heavy enough to be used to mount a winch safely in this case, and you would need to tie the mount into the trailer frame for stability. We have a Universal Hand Winch Right Angle Mounting Bracket, item # DL24110, which would make the fabrication of the raised mount easier.
An option I would look at, would be... view full answer...
What you're needing is a receiver winch mount like part # BDW20011. The mount will work in a 2-inch receiver on the rear or front of a vehicle. If the mounting plate of the Bulldog # BDW66FR winch is removed, the 6-1/2 x 4-1/2 inch bolt pattern of the winch will perfectly match that of the # BDW20011 mount. The mount has holes that would be compatible with the 10 inch center to center bolt pattern for the winch fairlead. The mount has 10-1/2 inch center to center fairlead bolt hole spacing,... view full answer...
I recommend going with the Bulldog Winch Rear Wiring Kit # BDW20206 for your 2014 Toyota Tacoma.
This wiring kit is 20' long, is constructed from thick 2 AWG wire so it can be used on heavier capacity winches if need be, and also features a pair of quick connects so you can easily connect the winch to the wiring.
If you're needing a winch tray so you can mount your winch to your vehicle, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles # BDW20011 will work with winches... view full answer...
If you already have four E-Tracks mounted to the floor of your enclosed trailer and you wish to secure your ATV with only straps, not wheel chocks too, you certainly can do this. But instead of using the strap-and-chock kit # EM09160 you can use one of the E-Track strap-only items shown on the linked page, such as 2-inch x 12-foot ratchet strap # EM59136 which is rated for a working load limit (WLL) of 1165-lbs.
We also have longer ratchet straps like the 16-foot # EM59139 with the same... view full answer...
The mount plate included with the # SW1130220 provides a means to mount the winch to a flat surface like a trailer. For a custom winch mount compatible with your Polaris 570 Sportsman, you'd need the # BDW15174 custom winch mount. view full answer...
We do have the Curt Front Mount Trailer Hitch Receiver # C31086 which is comfirmed to fit all but the Rubicon and Mojave trim levels of your 2023 Jeep Gladiator. This will allow you to then position the Bulldog Winch Hitch Mounted Winch Mounting Plate # BDW20011 with one of their Wireless Winches # BDW10040 in either the front or rear receiver.
The Bulldog Winch Rear Wiring Kit # BDW20207 will provide you with the necessary wiring to run the winch from the rear of your Gladiator. view full answer...
Go To Results